這個頁面目前是做為個人Zaurus筆記使用,未來有空會寫得更清楚、有系統。
Zaurus
相當完整的manual by TriSoft
my Zaurus SL-C3000 and SL-C3100
勸敗文:
基礎動作
還原/備份
(這個部分我沒有做,僅列出個人覺得相關的網頁)
介面中文化 / 英文化
英文化
拿到Zaurus之後第一件事情應該是中文化,不過我買的這台已經中文化完畢。但是由於顯示字體大小不合我意,於是折騰了很久。WBCD: Change OS to English可以將選單及介面英文化。對我來說,日文比英文更難懂,而不完全的中文化我也不喜歡,於是最後決定通通換成英文了。但似乎有更簡便的方式,參考E-OnWeb.Com :: Zaurus SL-C3000 筆記中提到:
但其實此機己內置英文界面(部份只有日文),只要作少量更改便變成英文界面。
首先用任何 Text Editor打開以下檔案:
/home/zaurus/Settings/locale.conf
尋找以下內容:
[Language]
Language = ja
更改為以下內容(註2):
[Language]
Language = en
完成後儲存起來再重新啓動(Reboot)便可以看見英文界面了。
上頭的text editor 推薦ZEditor,請看下頭程式部分的下載連結。但注意,要在啟動畫面(也就是像Windows的桌面)中,長點程式,把其中的"execute with root privilege"勾起來。
中文化
若想要簡單的中文化請參考下列文章:
關於字形
做完英文化後仍然需要貼上中文化字形。參考Zaurus SL Type 中文化自己做,步驟簡述如下:
- 安裝程式Tree!Explorer QT
- 上網下載字形。字形的t表示方向。只需t10即可。
- 將網路上找到的字形放入機子中。(有MD型的可以放在hdd3中,其他可以放在卡上,但是這表示這張卡是一直會放在機子中的)
- 找到 /home/QtPalmtop/lib/fonts/,將內部的字型全部刪除。但保留 fixed_120_50_t10.qpd 給 terminal用。
- 將卡上的字型複製。到上面的資料夾中從程式的menu選"paste symlink"貼上。
- 重開機,完成。
註:
- 裝完ckeyboard記得把 taipei 字形刪除,改用自己的字型連結(貼上字形的system link,然後更名為 taipei_100_50_510.qpf、taipei_120_50_510.qpf ),以免系統使用taipei字形。
其他連結:
中文輸入法
台灣的使用者當然是用ckeyboard。但在SL-C3000上會有CKeyboard輸入怪怪的..的問題,不過基本上只要熟悉了按鍵之後這樣的情況就會減少。
其他輸入法:
中文化的問題
- 多媒體播放器內部亂碼待解決
- update: 應該早點搜索的 X_X :Zaurus Music Player 的奇怪問題
- 6/11 '06 update: 發現解決方法。由於之前有人提及在用iTunes之後問題解決,恰巧我又是用iTunes,所以就嘗試了一下。根據交叉比對的結果,猜測Zaurus的music player在讀取ID3 tags的時候,會先讀ID3 ver.1的tags再讀ver.2的tags,而ver.1的tags不支援unicode,所以會造成亂碼。用iTunes的解決方式如下:
- 將tags先轉換成「無」。(清除原先所有tags,但是iTunes library中的資料會保留)
- 將tags轉換成 ver.2以上的(我是轉成v2.4)。
- 轉完之後會發現在Windows中檔案資料不見,推測應該是Windows讀的是ID3 ver1的標籤,但是將檔案丟到Zaurus上就正常了。
Top
個人化
程式
參考:
目前安裝了下列程式:
其他:
程式使用心得
由於JustReader支援html,所以不需要任何轉檔。在Scrapbook中選擇匯出,就會把資料以原來的名稱當成資料夾名稱匯出。
Opera 上網
目前用Opera上網中 感覺相當順暢 重點是網頁顯示正確 而且快捷鍵相當方便
轉影片
- 使用Windows Media Encoder:
- 由於上述的步驟我無法轉出目前手邊的的.avi檔,於是找了很久,終於找到免費的軟體:SUPER。轉的速度有點慢(不過無從比較),轉出來的確能看了。
- C3000播VGA片
video: mpeg4 / 320*240 640*480 / Frame: 25 / bitrates: 384kbps
audio: mp3 / sampling: 44.1kHz / channel:2 / Bitrates: 56kbps
320* 240 跟 640* 480 的畫質區分不是很明顯,但是640*480非超頻不可,所以還是轉成320*240就好。
Top
進階
SWAP
update: 安裝memoryapplet即可。目前可設在hdd3。唯一麻煩是開機要手動一下。
參考:my Zaurus SL-C3000 and SL-C3100 - customisations中的 enaling swap
基本上,我是為了pdaXqtrom跟Opera設swap的。設定方式如下:
# su
# dd if=/dev/zero of=/hdd3/swapfile bs=1048576 count=128
# mkswap /hdd3/swapfile
# swapon /hdd3/swapfile
# echo "/hdd3/swapfile swap defaults 0 0" >> /etc/fstab
enable swap: # swapon /hdd3/swapfile
disable swap: # swapoff /hdd3/swapfile
注意:都是root
check swap: # cat /proc/swaps
其他相關文章:
遠端登入
硬體
硬碟
更換硬碟
內建的硬碟?
Hitachi Travelstar 4K80 hard disk drives
special kernel
BT
Top
Other OS
!!Debian / XQt
改用下列方式跑pdaXrom:
pdaxQtrom
pdaxQtrom是在Sharp / cacko ROM 上直接執行pdaXrom的一個解決方案。關於pdaXrom可以參考:
note:記得先安裝KeyHelper Applet,才能使用alt。可以抓my Zaurus SL-C3000 and SL-C3100 - customisations這篇的 keyhelper.xml、keyhelper.conf來安裝。指令:khctl
個人修改key mappings如下:
- Alt key - the left Japanese key (kana/hira) next to the Ctrl key
- Shift+Mail will bring up the application/quick menu for favourite apps
- Shift+Address will bring up the documents menu for frequently accessed files
- Shift+Calendar will bring up the settings menu for common tasks
- Home = switch between Menu Tabs
- Menu key - brings up the pulldown menu of the current application, or launch the application from the quick menu when pressed with the shortcut key.
- Shift+Home will bring up the task selector similar to alt + tab on windows
- Ctrl + Menu when Menu does not work, will give Alt + f (bring up the file menu)
- Ctrl + t = « (left double angle quotation)
- Ctrl + y = » (right double angle quotation)
- Ctrl + w = × (multiplication sign)
- Ctrl + r = ÷ (division sign)
- Ctrl + - = ± (plus minus sign)
- Ctrl + m = º (little circle sign)
- Fn+Shift will allow Alt key combinations from a-z and 0-9 except for x, c and v (the Alt key does not work for some applications)
pdaXqtrom中的mapping設定
* Alt + Tab = Next Window
* Alt + Shift + Tab = Previous Window
* Alt + c = Close Window
* Alt + m = Minimise Window
* Alt + n = Maximise Window
* Alt + h = Maximise Window Horizontally
* Alt + v = Maximise Window Vertically
* Alt + s = Shade Window
* Alt + t = Toggle Decor
* Alt + r = Raise Window
* Alt + l = Lower Window
* Alt + Up = Move Window Upwards
* Alt + Down = Move Window Downwards
* Alt + Left = Move Window to the Left
* Alt + Right = Move Window to the right
* Alt + space = FluxBox Menu
* Alt + 1 = Virtual Window 1
* Alt + 2 = Virtual Window 2
* Alt + 3 = Virtual Window 3
* Alt + 4 = Virtual Window 4
* Alt + x = Launch Terminal
xpdf:
xpdf has the following key mappings:
o = open file
r = reload
f = find next
n = next page
p + previous page
+ = zoom in
- = zoom out
z = zoom page
w = zoom page width
0 = zoom normal
q = quit
scim的問題
記得到/mnt/pdaXqtrom-base/tools/中執行 monolingual off(也就是enable scim)。
如果還是有問題,執行/mnt/pdaXqtrom-base/tools/xqtcleanup,然後重新安裝。
字型
自行新增字型:放在 /usr/share/fonts 下。
原先 pdaXqtrom會建立一個連結到 /mnt/pdaXqtrombase/usr/share/fonts下的連結。把原先的連結資料夾刪除,新增一個資料夾,然後把自己新增的字型和原先的字型 symlink 過來。
新增StarDict字典
放在 /usr/share/stardict/dic 下。
自行寫程式
programming:
希望自己寫得出許氏的table,重新做出ckeyboard。
ipk製作
Zaurus SL-C700設定の記録
Top
Comments (0)
You don't have permission to comment on this page.